What’s New
New in Version 31.0.11.10
Smart Session Table Adjustment
Based on research Radware performed, more than 99% of the Alteon platforms in the field use less than 10% of their session table capacity.
Alteon allocates static memory for the entire session table in advance even if Alteon uses only a few thousand entries.
In order to increase Alteon free memory, the session table has been reduced to 50% of its capacity.
The session table will not be changed automatically in the following cases:
The user changes the default value (100%) of the session table.
The session table peak is above 35% since the last reboot.
Platform | RAM Size | 100% Session Table | 50% Session Table | Free Memory Saving (free memory improvement) * |
---|
4208 | 8GB | 6M | 3M | 706 MB (+53%) |
5208 | 16GB | 12M | 6M | 1,358 MB (+34%) |
5424 | 32GB | 22M | 11M | 2,482 MB (+24%) |
5820 | 32GB | 22M | 11M | 2,482 MB (+24%) |
6024 | 32GB | 20M | 10M | 2,260 MB (+19%) |
6420 | 32GB | 46M | 23M | 4,894 MB (+210%) |
7612 | 96GB | 46M | 23M | 4,603 MB (+11%) |
7220 | 96GB | 46M | 23M | 4,603 MB (+11%) |
8420 | 128GB | 76M | 38M | 8,596 MB (+16%) |
9800 | 192GB | 140M | 70M | 7,901 MB (+8%) |
*Based on the platform’s default RAM size
The session table size can also be changed manually with the following CLI command:
/c/slb/adv/sesscap
Enter capacity (400 , 200 , 100 , 75 , 50 , 25 , 12) of entries sessions table: <Session table capacity>